General AC 1.5 ton price in Bangladesh

General AC 1.5 Ton Price in Bangladesh

A General 1.5 Ton AC is intended for customers who need dependable cooling for a medium-sized bedroom, living room, office cabin, meeting room or similar enclosed space. The category currently includes five General and OGeneral split air conditioners with different model numbers, airflow functions, refrigerants, filters, room-coverage recommendations and selling prices. Customers can also explore the complete General AC collection in Bangladesh to compare this capacity with smaller residential units and larger commercial cooling systems. The General AC 1.5 ton price in Bangladesh currently displayed on Ponnobd Electronics ranges from BDT 61,000 to BDT 80,000. The category page shows five products, and every listed model is presently marked Out of Stock. Prices, promotional amounts and availability can change, so customers should open the relevant product page or contact the store before making a purchase decision.

Latest General AC 1.5 Ton Price List in Bangladesh

The following table contains the products and applicable selling prices currently displayed in the General 1.5 Ton AC category. The feature descriptions are based on the corresponding product pages. Where a page contains incomplete or inconsistent technical data, customers should confirm the final specification before ordering. :contentReference[oaicite:2]{index=2}

The OGeneral ASGA18FMTA is the lowest-priced model in this collection at BDT 61,000. The General ASGA18FMTB follows at BDT 62,000, while the General ASGA18FETA Non-Inverter model is displayed at BDT 75,000. The ASGA-18AET and OGeneral ASGA18FETA are the highest-priced products in the category at BDT 80,000 each. These are current displayed selling prices rather than permanently fixed prices. :contentReference[oaicite:3]{index=3}

Types of General 1.5 Ton AC Available in Bangladesh

General 1.5 Ton Split Air Conditioner

Every model currently listed in this category uses a split-air-conditioner configuration. A split AC separates the indoor cooling unit from the outdoor compressor and condenser unit. This format is commonly selected for bedrooms, living rooms and offices because the compressor remains outside the occupied room. Installation requires appropriate refrigerant piping, electrical wiring, drainage and a safe outdoor-unit location.

General 1.5 Ton Non-Inverter AC

The General ASGA18FETA product title explicitly identifies it as a non-inverter air conditioner. A non-inverter or fixed-speed compressor generally operates at a set speed and cycles on and off as cooling demand changes. This configuration can suit customers who prioritise the initial purchase price or expect to use the AC for limited periods instead of running it continuously throughout the day.

The General ASGA18FETA page specifies a rotary compressor, R32 refrigerant, automatic airflow adjustment, moisture removal and stated power consumption of 830 watts. However, the same page contains conflicting cooling-capacity figures, showing both 11,600 BTU per hour and 18,000 BTU in different sections. Customers should therefore confirm the precise rated cooling capacity directly with Ponnobd before ordering this model. :contentReference[oaicite:4]{index=4}

General 1.5 Ton Fixed-Speed Models with R410A

The General ASGA18FMTB product page identifies R410A in its main specification summary and states a recommended coverage range of 150–180 square feet. It also highlights six health filters, multiple fan speeds and a 220–240V, 50Hz electrical requirement. Its displayed selling price is BDT 62,000, and the listing is currently out of stock. :contentReference[oaicite:5]{index=5}

The OGeneral ASGA18FMTA page also identifies R410A refrigerant and an 18,000 BTU cooling capacity. Its listed functions include a rotary compressor, automatic restart after a power failure, automatic cleaning, sleep operation, moisture removal, automatic fan operation and low-voltage startup. The page shows coverage figures ranging from approximately 180 to 200 square feet in different sections, so the intended room should be assessed according to its actual heat load. :contentReference[oaicite:6]{index=6}

Older General Models with R22 Refrigerant

The General ASGA-18AET and OGeneral ASGA18FETA pages identify R22 as the refrigerant. The ASGA-18AET is listed with an 18,000 BTU cooling capacity, an approximate coverage range of 130–170 square feet, turbo cooling, flexible airflow, automatic restart, a washable filter and moisture removal. The OGeneral ASGA18FETA page states an 18,000 BTU capacity, approximately 120–160 square feet of coverage, 1,920-watt power consumption, anti-fungus filtration and an indoor noise figure of 33 dB. :contentReference[oaicite:7]{index=7}

Customers considering an older R22 model should verify refrigerant servicing, spare-parts accessibility, installation requirements and long-term maintenance support before purchase. The refrigerant stated on the product page must be matched by suitable servicing equipment and technical procedures.

General 1.5 Ton AC for Bedrooms, Living Rooms and Offices

A 1.5 Ton air conditioner is generally considered for a medium-sized room, but tonnage should never be selected from floor area alone. The current General product pages provide model-specific coverage recommendations ranging from approximately 120 to 200 square feet. These figures are useful as initial guidance, but the considerable difference between them demonstrates why buyers should evaluate the complete room rather than relying on a single universal measurement. :contentReference[oaicite:8]{index=8}

Room Dimensions and Ceiling Height

Measure the room’s length and width to estimate its floor area, then consider the ceiling height. A high ceiling increases the volume of air that must be cooled. An open-plan area or room connected to another space may also require more cooling capacity than an enclosed room with the same floor measurement.

Sunlight and Building Position

A west-facing room, top-floor bedroom or space with large glass windows may receive substantial heat during the afternoon. Such a room can place greater demand on the compressor than a shaded room on a lower floor. Curtains, roof insulation, window treatment and wall exposure can therefore influence whether a 1.5 Ton model is adequate.

Occupants and Heat-Producing Equipment

People, computers, televisions, lighting, cooking appliances and frequently opened doors add heat to a room. A private bedroom and a similarly sized office with several employees may not have the same cooling requirement. Customers purchasing an AC for a business environment should include equipment and occupancy in the capacity calculation.

Customers with a compact room can compare the General 1 Ton AC collection. For a wider living room, larger office or space with a heavier heat load, the General 2 Ton AC category may provide a more appropriate starting point.

Key Features to Consider When Buying a General 1.5 Ton AC

Cooling Capacity and BTU Rating

A 1.5 Ton label provides an initial capacity classification, while the stated BTU rating provides a more precise reference. Several products in this category are listed at 18,000 BTU. Customers should compare this value with the model’s coverage guidance, airflow rate, compressor configuration and intended operating conditions.

Inverter or Non-Inverter Technology

An inverter compressor can change its operating speed as the room approaches the selected temperature, while a conventional compressor generally relies on on-and-off cycles. Customers who use an AC for long periods may prioritise inverter operation and controlled temperature management. Customers with limited daily usage may place greater importance on the initial purchase cost. The present category does not clearly identify an inverter model among its five listings, while one product is explicitly labelled non-inverter.

Power Consumption and Efficiency Information

Electricity use depends on compressor technology, rated input power, room heat load, thermostat setting, outdoor temperature, installation condition, filter cleanliness and daily operating hours. Product-specific wattage and efficiency information should be compared instead of assuming that every 1.5 Ton model consumes the same amount of electricity.

The OGeneral ASGA18FETA page states 1,920-watt power consumption and an EER of 2.76 W/W. The General ASGA18FETA Non-Inverter page displays 830-watt power consumption and an EER of 3.13 W/W, although that listing also contains conflicting capacity information. These differences should be clarified before using the figures to estimate running costs. :contentReference[oaicite:9]{index=9}

Refrigerant Type

The current listings contain R410A, R32 and R22 refrigerant descriptions depending on the model. Refrigerant type affects system design, installation procedures and servicing requirements. Customers should verify the exact refrigerant stated for the selected model and confirm that qualified technical support is available for future maintenance.

General AC 1.5 Ton Price Range in Bangladesh

The current General AC 1.5 ton price in Bangladesh displayed on Ponnobd ranges from BDT 61,000 to BDT 80,000. The difference between models may reflect model generation, compressor configuration, refrigerant, cooling output, airflow, filter design, electrical characteristics, available functions and current promotional pricing. Stock status can also influence whether a displayed price remains applicable when a product becomes available again. :contentReference[oaicite:11]{index=11}

The product price may not represent the complete installation cost. Customers should confirm whether copper piping, insulation, drainage pipe, electrical cable, outdoor-unit brackets, transport, drilling, installation labour or additional materials are included. Requirements can vary according to the distance between the indoor and outdoor units and the accessibility of the installation location.

For substantially larger cooling requirements, Ponnobd also maintains verified categories for General 2.5 Ton AC, General 3 Ton AC, General 4 Ton AC, General 4.5 Ton AC and General 5 Ton AC. These higher-capacity collections are more relevant to spacious offices, conference rooms, showrooms and commercial cooling projects than a typical residential bedroom.

Compare General 1.5 Ton AC with Other Brands

All five General 1.5 Ton models on the current category page are marked out of stock. Customers who need an air conditioner immediately can compare other verified Ponnobd categories without assuming that the specification, warranty or availability will be identical across brands.

The Pentanik AC collection includes models from 1 Ton to 2.5 Ton, while the Chigo AC category includes split, window and higher-capacity options. Customers can also review the Gree AC range for portable and split configurations.

Buyers specifically seeking inverter-labelled products can compare the Samsung AC collection and the Midea AC range. Samsung’s current category contains several Digital Inverter models, while Midea’s category includes both standard and inverter residential units. The final comparison should consider capacity, refrigerant, power data, installation requirements, model-specific warranty and live stock rather than price alone. :contentReference[oaicite:12]{index=12}

Installation and Maintenance Considerations

Indoor-Unit Position

The indoor unit should be mounted where airflow can travel across the occupied area without being obstructed by a wardrobe, curtain or tall furniture. It should also remain accessible for filter cleaning and professional servicing. The condensate drain must have an appropriate route to prevent water leakage inside the room.

Outdoor-Unit Ventilation

The outdoor unit requires sufficient ventilation to release heat. A restricted enclosure, unstable mounting surface or location exposed to accumulated debris can reduce performance. The unit should be securely installed while preserving access for coil cleaning, electrical inspection and refrigerant servicing.

Routine Filter and Coil Cleaning

Dust on the filter or indoor coil can restrict airflow and increase operating time. The washable filter should be cleaned according to usage conditions, while the indoor coil, blower, drainage system and outdoor condenser require periodic professional attention. Maintenance frequency may need to increase in dusty environments or where the AC operates for many hours each day.

Confirming Warranty and Support

Warranty information is not consistent across the current product pages. Some detailed pages display a one-year guarantee and one-year service warranty, while their quick-summary sections show warranty as N/A. The ASGA18FMTB page also shows warranty as N/A. Customers should obtain written confirmation of the exact product, compressor, parts and service coverage before completing payment. :contentReference[oaicite:13]{index=13}

Why Buy General 1.5 Ton AC from Ponnobd Electronics

Ponnobd provides individual product pages containing model names, displayed selling prices, regular prices, stock status and technical details. This gives customers an opportunity to compare the five available General 1.5 Ton listings before discussing stock, installation or order arrangements.

The verified Ponnobd contact and showroom page lists a head office in West Shewrapara, a Mirpur showroom, an Uttara showroom, a Chattogram showroom, a Sylhet showroom and a service centre in Mirpur. Customers can contact the store about current availability, model specifications, delivery arrangements, installation requirements and warranty documentation. :contentReference[oaicite:14]{index=14}

Commercial terms should still be verified for the exact product. Although several legacy product pages mention EMI, cash on home delivery in Dhaka and courier delivery outside Dhaka with applicable charges, these statements are model-specific. Customers should confirm whether the same payment or delivery options remain available for the selected model and destination.

Buy General AC 1.5 Ton in Bangladesh

A General 1.5 Ton air conditioner can be suitable for a medium bedroom, living room, office or similar enclosed space when the selected model matches the room’s actual heat load. Before purchasing, compare the BTU rating, coverage guidance, compressor type, refrigerant, power consumption, airflow, filtration, noise, installation conditions and verified warranty terms.

The General AC 1.5 ton price in Bangladesh currently displayed on Ponnobd starts at BDT 61,000 and reaches BDT 80,000. Because all five products are presently marked out of stock, customers should confirm availability before arranging installation or making payment. When stock returns, review the individual product page carefully and request clarification wherever specifications differ between sections of the listing.